|
|
|
Hard
metal has several qualities. They have been assembled into the
following groups in accordance to their attributes:
 Steel
Machining
 Fused
Irons and Non-Ferrous Metals
Micrograin
Grades
Grades
for Mechanical Seals rings
 |
|
Steel
Machining |
|
|
|
Argensinter
Code |
ISO
/US Code |
|
|
|
|
|
P10 |
P05-P10
C8 |
Finishing.
High cutting speed and
low feeds operations. Turning, copying, tapping. Free from vibration
work. |
|
|
|
|
P10 |
P20
C7 |
Semifinishing. Lathe operations at average speed, lathe work, milling
and flattening at small cutting depth. |
|
|
|
P25 |
P25
C6 |
Steel milling and cast steel milling. Resistance to temperatura variation
and plastic deformation. |
|
|
|
P30 |
P30
C6-C5 |
Roughing. Lathe operations at low speed and and large cutting depth or unfavourable conditions. |
|
|
|
P40 |
P40
C5 |
Planing,
turning. Large areas of cut and unfavourable work conditions, variable and
interrupted cutting, exposed to vibrations. |
|
|
|
P50 |
P50
C5 |
Turning with very large areas of cut and very unfauvorable work
conditions, exposed to marked vibrations. |
|
|
|
|
|
|
|
|
|
|
Top |
|
|
|
Fused Irons
and Non-Ferrous Metals Machining |
|
|
|
Argensinter
Code |
ISO / US Code |
|
|
|
|
|
K05
S |
K05
C4-C3 |
For hard casting machining more than 250 HB. Light alloys, crystal, cerámic,
etc. For drills and reamers. |
|
|
|
|
K10 |
K10
C3 |
Grey cast iron machining over 220 HB, malleable cast iron, short fibre
non-wave materials and abrasive materials. |
|
|
|
T20 |
K20
C2 |
Grey cast iron machining up to 220 HB, non-ferrous metals , malleable
cast iron and for parts subjected to wear. |
|
|
|
T30 |
K30/K40
C1 |
High shock resistance grade for file engraving , and metla flushing and
extruding. Compressed wood. |
|
|
|
|
|
|
|
|
|
|
|
Top |
|
|
|
Micrograin
Grades |
|
|
|
Argensinter
Code |
ISO / US Code |
|
|
|
|
|
MC03 |
K01
C4 |
New superfine grain carbide grade. Applications in the timber industry in
very hard materials like HDF. |
|
|
|
|
K01M |
K01
C4 |
New
superfine grain grade. Applications in the timber industry in very abrasive
materials like MDF. Corrosion-resistant. |
|
|
|
K15 |
K20
C2 |
Recomended for rotary tools where high hardness and acute cutting profile
are needed. |
|
|
|
|
|
|
|
|
|
Top |
|
|
|
Grades for
Mechanical Seals Rings |
|
|
|
Argensinter
Code |
ISO / US Code |
|
|
|
|
|
N9 |
- |
Applications that requires good corrosion resistance. It has good wear
resistance and high hardness. |
|
|
|
|
N10 |
- |
Recommended for proofing rings where good corrosion resistance and
thermal shock resistance are required. |
|
|
|
|
|
|
|
|
|
|
|
|
|
Print Friendly